DIY Hub
Publically available RaynAudio parts you can easily print and make yourself at home
You can easily 3D print replacement parts, our discontinued headphones or our other open source projects at home as long as you own a 3D printer. Please keep in mind your own prints may not end up being the same qualiy. Our discontinued projects include all other required information for you to be able to DIY your own RaynAudio headphone at home.
Headphone replacement parts
Kitsune magnet ring
The magnet ring you attach earpads with to the Kitsune. You will need 8x circlular Neodymium N35 magnets to glue onto the ring (4mm diameter, 1.5mm height) per ring.
Inner grill
The inner grills/meshes for all models
Outer grill
The outer grills for all models. Keep in mind some of these originally use laser cut wood and not a 3D printed part.
Driver baffle
Driver baffles of all headphones that have a seperated baffle from the main cup.
3.5mm connector holder
All models except Kitsune and Mimic 2024 use a Mini XLR sized connector hole, which includes this small adapter for a 3.5mm connector. As a part of DIY, you can also use a Mini XLR connector instead of this + 3.5mm.
Front driver cover
Some headphones require a safety mesh in front of the driver.
Full headphones
Mimic 2024
You can print yourself the original, now discontinued Mimic 2024. It consists of a thin shell with a 3.5mm connector tube, small mesh in the middle and a custom built-in grill pattern. The driver baffle is made for 50mm drivers. This baffle is edited from the original one to fit more DIY projects. You are free to edit the model to fit your own drivers, contact us to edit the model or contact us to buy the original baffle and 68mm planar magnetic drivers for the full experience.
Parts: 3 | Total prints: 6
Mimic 2024 Cup Mimic 2024 Driver Baffle Logo
Other required parts
Headband with 100mm yoke spread | Our recommendation: AliExpress ๐
3.5mm connectors (PJ392) | AliExpress ๐
Harp
Our portable headphone is now available for you to print at home. The main cup is seperated into 2 parts - the main and top part that are later glued together to finalize their build. These are the only headphones that use a smaller logo, which is included in the available files. The top part/baffle supports 48-53mm drivers (52mm and less may sit loose unless glued in place). You are free to edit the model to fit your own drivers, contact us to edit the model or contact us to buy the original 53mm planar magnetic drivers for the full experience.
Parts: 7 | Total prints: 10
Harp Main Cup Left Harp Main Cup Right Harp Top Part Harp Inner Grill Left Harp Inner Grill Right Harp Small Logo Harp Outer Grill
Other required parts
Headband with 65mm yoke spread | Our recommendation: AliExpress ๐
3.5mm connectors (PJ392) | AliExpress ๐
Other projects
โโโ
There's nothing here yet
Come check later if we add something here